10 Easy Steps to Attach Trailer

A lot of drivers believe that they have to attach a trailer to their vehicle in transporting a utility trailer, camper, boat, or any recreational vehicle. Most trucks and SUVs are prepared with a towing package, which enables drivers to attach a trailer by utilizing a ball hitch and link the electrical system of the trailer to the electrical system of their vehicle. Before starting to attach a trailer to your vehicle, you need to make sure that your vehicle is fortified with the proper size ball hitch for your circumstance. The following are 10 easy steps for a hassle-free trailer attachment according to Oklahoma Driving School: 

  1. As you back your car towards the trailer, it is usually beneficial to have somebody direct your steering. If you don’t have anyone with you to guide you, it might be required for you to get out of your vehicle many times to observe where you are close to the trailer’s neck. 
  2. Before you back your vehicle to the trailer, raise the level of the trailer’s hitch. Which means that that is more than a few inches higher compared to the ball hitch on your back bumper.  
  3. Attempt to place you’re the ball hitch of your vehicle underneath the trailer hitch. This step is important particularly if you’re attaching a heavy trailer, which you cannot reposition manually.  
  4. Make sure that the trailer hitch is in the unlocked position. The handle would be placed at a right angle to the trailer’s neck. 
  5. Utilize the hand crank of the trailer to lower its hitch for it to be securely fitted over the ball hitch of your vehicle. The ball must securely fit inside the rounded space at the edge of the trailer’s neck.  
  6. When you have successfully attached the trailer, utilize the hand crank to lift the wheel of the trailer. Secure the wheel so that it becomes parallel to the neck of the trailer.  
  7. You have to place the handle in a locked position for it to be paralleled to the neck of the trailer. Put the pin inside the handle to make sure that the trailer would still be attached to your vehicle’s ball hitch. 
  8. Trailers usually have two chains with large hooks linked to the ends. These chains are utilized as a safety preventive measure. When your trailer detaches from the ball hitch for any reason, these chains would stop your vehicle from being totally separated from the trailer. Thus, before you attach them to the bottom of the trailer hitch of your vehicle, you must cross the chains over each other. To keep them from dragging and shorten their length, you should twist the chains. Then, from the bottom, insert the hooks to make sure that they will stay attached.  
  9. Connect the electrical plug of the trailer to the electrical system of your vehicle. Before you begin to drive with a trailer, make sure that you test its turn signals, brake lights, and its lights.  
  10. Remember that most states would require trailers to have a license plate. So, before driving with it, guarantee that your trailer has the proper tag.  

Those are only a few of many tips you can get from our website about drivers ed Tulsa. If you want to know more information or if you want to enroll for a private driving lesson before you start hitting the road, you can visit Tulsa Driving School now and inquire.  

 

Leave a Reply

Your email address will not be published. Required fields are marked *